Avigilon ACC Standard Client Version 4.12 User Manual download pdf (Page 61)

Setup

Figure A. Network dialog box

o Obtain an IP address automatically: select this option for the camera to connect to the

network through an automatically assigned IP address.

The camera will attempt to obtain an address from a DHCP server. If it cannot, the

camera will default to addresses in the 169.254.x.x range.

o Use the following IP address: select this option to manually assign a static IP address

for the camera.

Enter the IP Address, Subnet Mask and Gateway you want the camera to use.

4. Select the Control Port for connecting to the camera. This port is also used for manually

discovering the camera on the network.

5. Select the Enable Multicast check box to enable multicast streaming from the camera. You must

enable multicast to set up redundant connections to multiple servers.

Use the default generated IP Address, TTL and Base Port, or enter your own values.

6. Click OK.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 158 159

No comments

Avigilon ACC Standard Client Version 4.12 User Manual Page 61