Avigilon ENC-4P-H264 Installation Guide download pdf (Page 20)

English

Setting the IP Address

Through the ARP/Ping Method

Complete the following steps to configure the encoder to use a

specific IP address:

1. Locate and copy down the MAC Address (MAC) listed on

the Serial Number Tag for reference.

2. Open a Command Prompt window and enter the following

commands:

a. arp -s <New Encoder IP Address>

For example: arp -s 192.168.1.10 00-18-

85-12-45-78

b. ping -l 123 -t <New Encoder IP

Address>

For example: ping -l 123 -t 192.168.1.10

3. Reboot the encoder.

4. Close the Command Prompt window when you see the

following message:

Reply from <New Encoder IP Address>: ...

1 2 ... 15 16 17 18 19 20 21 22

No comments

Avigilon ENC-4P-H264 Installation Guide Page 20